โFeb-13-2019 04:06 PM
โFeb-17-2019 07:35 PM
temccarthy1 wrote:Not very difficult to install a battery disconnect or simply take the negative terminal off the battery when RV is not being used or towed.yillb wrote:
Probably a silly question, but if the battery disconnect is off, there should be no power at all coming from the battery, why aren't you disconnecting it?
probably does not have a battery disconnect swtch! Many TT's do not, including my Keystone Bullet...
โFeb-17-2019 06:44 PM
yillb wrote:
Probably a silly question, but if the battery disconnect is off, there should be no power at all coming from the battery, why aren't you disconnecting it?
โFeb-17-2019 06:42 PM
coachsburke wrote:
Good call. I also need to figure out how to disconnect the antenna amplifier, as it is never going to be used
โFeb-16-2019 08:56 AM
Vintage465 wrote:
I've seen every answer that could possibly come into play on this thread. Check every one of these that have been mentioned, especially the disconnect switch and the emergency break away.
Amateur Radio K3EXU
โFeb-15-2019 10:28 AM
โFeb-15-2019 08:39 AM
rrupert wrote:That too.
salesmen and even service people don't know squat about electrical systems, especially the care and feeding of batteries.
โFeb-15-2019 07:15 AM
2oldman wrote:colliehauler wrote:Good salesmen never say anything negative.
Why do not dealers tell this to new customers? They take a customer threw {sic} a PDI and don't explain it.
Amateur Radio K3EXU
โFeb-14-2019 10:23 AM
colliehauler wrote:Good salesmen never say anything negative.
Why do not dealers tell this to new customers? They take a customer threw {sic} a PDI and don't explain it.
โFeb-14-2019 10:11 AM
โFeb-14-2019 08:33 AM
colliehauler wrote:
What I have a hard time understanding is this is a very common occurrence. Why do not dealers tell this to new customers? They take a customer threw a PDI and don't explain it.
โFeb-14-2019 08:33 AM
colliehauler wrote:RVs are primarily designed to be plugged in. PDI assumes you store and use the RV plugged in. Battery is just for convenience during transit and to power the breakaway braking system.
What I have a hard time understanding is this is a very common occurrence. Why do not dealers tell this to new customers? They take a customer threw a PDI and don't explain it.
โFeb-14-2019 08:26 AM
โFeb-14-2019 06:42 AM
prichardson wrote:Parasitic drain can kill a new battery in days. I suggest a battery disconnect switch when not using or disconnect the negative terminal. If the electric emerency brake cord is pulled it will drain a battery in a very short time.
As others have said the "parasitic" drains can add up and can easily amount to 1 amp on newer units. This amounts to 24 amp hours per day. A group 27 battery fully charged has about 80 amp hours.
โFeb-14-2019 06:41 AM
prichardson wrote:
As others have said the "parasitic" drains can add up and can easily amount to 1 amp on newer units. This amounts to 24 amp hours per day. A group 27 battery fully charged has about 80 amp hours.