Bed Lifter

Cut a groove in the pedestal and slip an appropriate size piece of pipe into the groove. Pull out and lift up. The pipe end on the floor, under the bed, should give you plenty of leverage. The pipe would slip back under the pedestal out of the way when not in use.

I had the same problem when we added a mattress topper. We installed this kit and it works great. https://www.amazon.com/Hatchlift-BLK-LGE-Large-Bedlift-Kit/dp/B00KPR2EW0

Hatchlift company - http://www.hatchlift.com/

Here in Virginia we call them "Sticks." They can actually fall off a tree and bump your head. Maybe that's what you need, not a bump on the head, a stick.

Just put two 80Lb Pneumatic lift cylinders on it...Hatch lifts. This is easy and cheap.

fulltimedaniel wrote:
Just put two 80Lb Pneumatic lift cylinders on it...Hatch lifts. This is easy and cheap.

Thanks. I will see what I can find.

The new mattress defeats the lifts but they still help. Brooms may die but the sticks live on. Cut one to length, lift bed, insert stick, get or place stuff under bed lift bed, remove stick, drop bed. Store stick where you find it handy.

I realize the "stick" comments are extremely funny, but they do not come close to answering the OP's request for help "lifting" the bed. The propping part is the easy part as we have sticks in Illinois and Texas.

If the end of your bed platform isn't blocked just add a couple of cabinet doors and eliminate the need to lift the platform at all. :B

SoundGuy wrote:
If the end of your bed platform isn't blocked just add a couple of cabinet doors and eliminate the need to lift the platform at all. :B

Did you fabricate your cabinet doors or buy them? It sure looks clean. I'm thinking of adding drawers under mine with a door front attached.

SoundGuy wrote:
If the end of your bed platform isn't blocked just add a couple of cabinet doors and eliminate the need to lift the platform at all. :B

Nosedive wrote:
Did you fabricate your cabinet doors or buy them? It sure looks clean. I'm thinking of adding drawers under mine with a door front attached.

After measuring the area I had to work with I realized the cabinet door beside the microwave oven was exactly the size I needed so I had my dealer order 2 more. The trick with a new trailer is to do this soon after purchase before the manufacturer changes interior decor and still has replacements that properly match the rest of the trailer.



I've done this mod with our previous trailer as well and in each case intentionally avoided drawers which waste space taken up by the sliders.