Bigfoot & 2006 Dodge Ram dually & fender flare question

kohldad wrote:

Reddog, the photos kohldad posted for me (above) show the Torklift solution. It's two angle pieces 1-3/4" x 2" with flat stock welded to the vertical 2" side of the angle. I didn't measure the thickness but think each are about 1/4". The two pieces are joined in the middle by another piece of flat stock with two bolts through each end of the two angle iron pieces. It bolts to the existing tie-down points on the camper, extends out each end, and has loops welded to each end for the tie-downs. Detail photos added below.