Bigfoot 2500 Underbelly, Thoughts and Pics
Starting on a project on the camper (Bigfoot 2500, 10.6) and as part of it, I needed to remove the bottom panels of the camper to see where the tanks are. I took some pics and stitched them together t...
Forum Discussion
they are suspended so warm air can circulate under the tanks. The foam would be plenty to hold the weight, but you would have to put plywood down first to distribute that weight. Doing this would get rid of the air gap and not allow air circulation around the tank to help keep it from freezing if the foam were to break down or just be inadequate for the temperature you're using it in.
