Bigfoot 2500 Underbelly, Thoughts and Pics
Starting on a project on the camper (Bigfoot 2500, 10.6) and as part of it, I needed to remove the bottom panels of the camper to see where the tanks are. I took some pics and stitched them together t...
Forum Discussion
If the bottom of the camper perimeter framing allows, I’d suggest supporting the tanks with additional transverse purlins or joists. So that the tank(s) are also supported in a way that does allow them to bear on the truck bed to an extent.
The more support the merrier if you use the camper water while camper floor is unsupported (off the truck and no other supports or saw horses etc under it).
The more support the merrier if you use the camper water while camper floor is unsupported (off the truck and no other supports or saw horses etc under it).
