Bigfoot 2500 Underbelly, Thoughts and Pics
Starting on a project on the camper (Bigfoot 2500, 10.6) and as part of it, I needed to remove the bottom panels of the camper to see where the tanks are. I took some pics and stitched them together t...
Forum Discussion
Tomorrow I will be working to add additional strapping. I have a bunch of angled metal that is pre-punched with holes, can't remember what it is called. This should provide the support for the middle of the tank to avoid the sagging at least. How much I accomplish we shall see as I'm fully expecting a miserable experience of it with being on my back on gravel with no space for my hands or tools to secure anything.
Anyway, my plan is to raise the forward portion of the tank completely so the top of the tank touches the bottom of the floor. Then, I'll leave the angle so that the back portion of the tank (where it connects to the hose) is the low point. This hopefully will result in me recovering about 20% of the water that would not drain otherwise.
I will try to take some pics to show what the end result is.
Anyway, my plan is to raise the forward portion of the tank completely so the top of the tank touches the bottom of the floor. Then, I'll leave the angle so that the back portion of the tank (where it connects to the hose) is the low point. This hopefully will result in me recovering about 20% of the water that would not drain otherwise.
I will try to take some pics to show what the end result is.
