Bracing trailer underbelly
Not sure where to post this. Our Coroplast, stiff plastic, underbelly is sagging in the middle and laying on top of our axles. How do we go about putting a brace across there, or screwing it back ...
Forum Discussion
There is no brace across for about 7 feet of this section forward to back. Only screwed to the sides, not across the middle.
Someone on another forum has the same trailer and just emailed his picture. He has a cross brace 2' forward and 2' aft of his axles so we have a point in which to start feeling for the frame to screw in the brace.
It is definitely not a dropped tank or water. Just too heavy a section that finally warped over time and sagged.
We will get the aluminum strip.
Thanks everyone.
Someone on another forum has the same trailer and just emailed his picture. He has a cross brace 2' forward and 2' aft of his axles so we have a point in which to start feeling for the frame to screw in the brace.
It is definitely not a dropped tank or water. Just too heavy a section that finally warped over time and sagged.
We will get the aluminum strip.
Thanks everyone.
