Breakaway Switch Confusion.
I recently purchased a 2003 25' Coachman travel trailer. The breakaway switch was crushed on the trailer so I replaced it but I am confused about the power for it. The old one only had 2 black wires c...
Forum Discussion
Kelpike wrote:
Hi, im not sure how to reduce the width of my picture. Thank you for clarifying my wiring connections.
Add width=640 just before the closing {/IMG}. It doesn't have to be the number 640, that is just the largest recommended width. It can be narrower.
Edd505 wrote:
what came off it, 2 wire or 3? Most are two wire and makes no differance on which goes where it's an on off switch. Pin in it's off pin out it puts 12V to the trailer brakes.
The reason the wires on this one matter is because of the LED light. If you wire it backwards, the LED will always be lit, rather than just when the brakes are activated. If you don't hook the white wire to ground, then it doesn't matter which wire the other two connect to.
