Jim549 wrote:
I would like to thank everyone for the helpful advice.
Just a couple of comments; The WD system was setup by the dealer. There is only 1/4 inch difference between the front and back of the truck. The front being higher. And when I mentioned dealership in my original posting, I was referring to the Chevy dealership service department.
Now, based on the advice I received from this thread, we (I) have decided a new 2500 is in order after the first of the year.
On the WD setup, the real question is: What is the difference measured at the front wheel well between the unloaded empty ride height and the ride height with WD set up? While GM has various recomendations, my experience with GM trucks is you want the ride height to be as close to the same as possible, never lower, but maybe 1/4-1/2 inch higher with WD hooked up.
Don't worry about the back.