Forum Discussion
dodge_guy
Oct 23, 2013Explorer II
No metal frame. It was a 2 piece glass (picture a thermo pain) and was sealed at the ends and had a rubber weatherstrip/seal around it that sealed to the trailer, this is where they leaked and why the OP had to repair the front wall. I had a 93 Award 727 trailer and it had A small leak at the front that i stopped before it caused any damage! They are excellent towing trailers to bad they were plagued with the water leak issue!
I would get a piece large enough to cover the opening and then heat it to conform to the contour of the front, IIRC it was only rounded side-side not up/down? Then maybe build some kind of frame to hold it and screw that into the opening?
I would get a piece large enough to cover the opening and then heat it to conform to the contour of the front, IIRC it was only rounded side-side not up/down? Then maybe build some kind of frame to hold it and screw that into the opening?
About Travel Trailer Group
44,025 PostsLatest Activity: Feb 06, 2025