Forum Discussion

majorgator's avatar
majorgator
Explorer
Dec 23, 2014

Diamond Plate Tool Box

Since I've pretty much reached my wits end on this topic, I figured I'd post here to see if anyone can help point me in the right direction.

I'm looking for a diamond plate tool box for my truck....but not so simple. I want it to be a flush mount (since I have a bed cover) and I want it to be 16" width or less. It doesn't need to be as tall as the bed sides. The only ones I've found that meet these requirements have 2 big protruding twist handles on top (ie UGLY). I don't mind straight diamond plate or black. Help!
Tow Vehicles
  • Cummins12V98's avatar
    Cummins12V98
    Explorer III
    Dec 27, 2014
    I know there are a lot less expensive products out there. For those who want the best this is a box worth looking at. It is 30" front to back had a sliding tray, narrow storage at the bottom front and is completely lined. This company makes boxes for truckers also. They have a complete line for pickups. Not cheap at $1,000.

  • RAS43's avatar
    RAS43
    Explorer III
    Dec 27, 2014
    I have a Deflecta-Shield box that is diamond plate aluminum and mounted in the front of my bed similar to what you want. And I also have a soft cover over the bed. I believe that Lund International bought out Deflecta-Shield as I looked on Amazon and see Lund boxes similar to mine. You might look there as Amazon has many different models.
  • greenenvy1's avatar
    greenenvy1
    Explorer
    Dec 27, 2014
    I ran these pork chop boxes under a soft cover for a bit. Made by Delta.

  • GeoBoy's avatar
    GeoBoy
    Explorer
    Dec 27, 2014
    I have a Weatherguard that is flush with the top of my box and it comes in 56" & 62" wide units. It hold my 2 Honda Generators and 2 - 2 gallon gas cans.
  • wintersun's avatar
    wintersun
    Explorer II
    Dec 26, 2014
    The same place that sells truck tool boxes in my area also sells the bed covers and I would expect them to know how to integrate the two.

    There are combo fuel tank and tool boxes being sold and you would lose tool storage but gain in fuel capacity. There are also tool boxes sold that mount rear of the wheel wells which makes access easier and these will not interfere with anything.
  • radio_flyer's avatar
    radio_flyer
    Explorer
    Dec 24, 2014
    I also have a 2015 F250 XLT. Went to Tractor Supply & found just what you are looking for. I installed it & have no problems. It clears the bed cover etc.
  • radio_flyer's avatar
    radio_flyer
    Explorer
    Dec 24, 2014
    I also have a 2015 F250 XLT. Went to Tractor Supply & found just what you are looking for. I installed it & have no problems. It clears the bed cover etc.
  • kw_00's avatar
    kw_00
    Explorer
    Dec 24, 2014
    I have a flush mount like the one ur asking about, and I got it from lowes. I love it due to the ability of using my fifth wheel and the ability to still use my cover.
  • sayoung's avatar
    sayoung
    Explorer
    Dec 24, 2014
    wlstroud wrote:
    Northern Tools and Tractor Supply have boxes that don't project above the sides of the truck.


    Tractor Supply has their boxes on sale for a 20% discount now.
  • MTPockets1's avatar
    MTPockets1
    Explorer
    Dec 24, 2014
    I ordered mine from www.deezee.com - exactly what you describe. I got the black diamond plate that fits under my hard folding cover. Good quality now in second truck.

About Travel Trailer Group

44,026 PostsLatest Activity: Feb 26, 2025