Dolly for Truck Camper

Replace 2 of the casters with ones that don't swivel. then it will track straight when you want it to.

Two of the wheels should be fixed. No photos.

Can you lock two of the wheels to keep them from spinning?

Images-Right clicking and click view image, I can see them otherwise not showing.
On 4 wheels generally lead end wheels would be fixed and the push side would be steer. I'd imagine pushing cart sideways be desirable so a means to lock temporarily until need to pivot.
Dont know if these help. Much smaller wheels on my welding cart. It would turn in circles before going straight or where ever it wanted.


Just drilled thru base with clear hole into castor flange, base is threaded

Brilliant, thanks

I've been using a metal dolly purchased from Rieco for many years. It has a hitch so I can move it with truck, though once inside garage on flat smooth floor I can move it by hand. It has fixed casters in the rear and swivel casters in the front (hitch).

AnEv942 wrote:
Images-Right clicking and click view image, I can see them otherwise not showing.
On 4 wheels generally lead end wheels would be fixed and the push side would be steer. I'd imagine pushing cart sideways be desirable so a means to lock temporarily until need to pivot.
Dont know if these help. Much smaller wheels on my welding cart. It would turn in circles before going straight or where ever it wanted.


Just drilled thru base with clear hole into castor flange, base is threaded

Now that, my friend, is a good fix!
No welding involved and STILL gets good penetration! Winning!