Door glass fell out....

[urbex]

Literally just brought home my "new" camper today, and it's already falling apart :S

It's a 1973 Amerigo truck camper (I know there's a truck camper forum, but this one was "vintage", so I thought this might fit better here), and the glass on the entry door...well, fell out today.

It appears that it was merely glued in with a hard, yet pliable, caulking on both sides of the glass. Is this the way things were done back then, or was this a prior owner quick fix?

Should I just clean out all the old adhesive, and reapply caulking in there to hold it? I was thinking of using something like silicone adhesive in there too.

[IAMICHABOD]

If it is the standard size like most RV doors you might try This

[bobndot]

There are replacements if you match the size.
http://www.adventurerv.net/replacement-window-for-phillips-entrance-doors-p-993.html?gclid=Cj0KEQjwg...

Video instructions , how to :
https://www.youtube.com/watch?v=ojDgMTdxd_s

[donn0128]

Most door window frames have tabs that the window mounts within. Along with some butyl putty tape it should be sufficient. Without the tabs, a good layer of butyl tape should hold it firmly on place when the two pieces are clamped together.