Down sizing LP tanks and adding scissor jacks
Good evening, i am contemplating down sizing my LP tanks from the 2 /30# to 2/20# - I installed an A-frame cargo tray (cc-255 from Stromberg Carlson) and the clearance between tanks and tray is limite...
Forum Discussion
Mhawk4,
YW! If things go well I will have the scissor jacks mounted this Sat. I will take some pics. I am also considering using some short pieces of the 2x2 steel to mount the middle jacks. No more than the width of the frame is the plan, basically just using them as a spacer to need less blocks as well. Originally I was planning on mounting a 4x6 block to the base.
YW! If things go well I will have the scissor jacks mounted this Sat. I will take some pics. I am also considering using some short pieces of the 2x2 steel to mount the middle jacks. No more than the width of the frame is the plan, basically just using them as a spacer to need less blocks as well. Originally I was planning on mounting a 4x6 block to the base.
