Draw bar cover

[ScottG]

My buddy is looking for a vinyl bag or cover that would go over his WDH draw bar while it's still on the truck. He says he saw one a while back but I've never seen one. Anybody know where he can get one?
Thanks in advance.

Scott

[harley4275]

Take the hitch head off and turn around and hook it back in the trailer coupler ,and lock the coupler. It wil not stick out to far.

[ezrydrs]

I cut a 20oz Coke bottle in half. The bottom part fits very snug on the ball. Won't help the shins though

[wireman]

I just use a heavy duty quart size baggie. Throw it away when needed and get a new one.

[SoundGuy]

wing_zealot wrote:
Great idea, but then I still have the sway bar ball.

Easy ... use a 1.25" Ball Cover ... I've got one of these as well. 🙂

[wing_zealot]

Great idea, but then I still have the sway bar ball.

[SoundGuy]

wing_zealot wrote:
So you don't get grease on your pants.

Then use a Fastway Hitch Ball Cover ... I do. 🙂

[wing_zealot]

So you don't get grease on your pants.

[SoundGuy]

ScottG wrote:
My buddy is looking for a vinyl bag or cover that would go over his WDH draw bar while it's still on the truck.

A large size tongue jack bag would work but I have to ask - WHY? :h

[ScottG]

I always remove mine as well but he likes to keep it in and there's no law against it. I have a feeling the covers he saw were custom made.

[beemerphile1]

Only cover like that I have seen was for the front tow bar on a towed.

I always remove mine because if you drive anywhere, it is unsafe and technically illegal to have anything protrude beyond the bumper. Federal laws dictate recoil/crush requirements of bumpers and anything sticking beyond the factory bumper becomes the De facto bumper.

[ScottG]

Thanks but this would be a cover for the drawbar that fits into the receiver on the truck.

[rockhillmanor]

I've only seen the ones that cover the whole hitch.
http://www.coverworld.com.au/drawbar-cover.html


Guess you could cut a slit in the front so it would go over the hitch tighter when attached to the truck.