Electric drill for lift jacks
Who makes a battery powered drill that will lift the truck camper? I have several drills but none have the torque to lift the camper. Also I know not to use a hammer drill as that will ruin the righ...
Forum Discussion
Wheelholder wrote:
When i had manual jacks, used an 18 volt ryobi. Put it in low gear and just kept walking around until I had it the height I wanted. reversed to lower.
Had it to do over, would make sure I had lithium batteries as they hold charge better when sitting.
I used a 12v Makita on manual jacks for years, then upgraded to a Ryobi 18v.
Of course if you don't have a charged battery, you go to plan B:
It works slower on 12v but will still get the job done.
One full size li-ion battery will last several cranking episodes.
