Electrical system doesn't work.
Hello all. Ok, I had my batts hooked up backwards and had my trailer plugged into my house. I fried the converter. I've installed a new converter and it does charge the batteries when plugged into ...
Forum Discussion
If you have a meter or a 12v test light, check for 12v power on the load side of the fuses and follow the wires until you find where the power ends.
Usually the breakers on the breaker panel are 120vac and are not part of the 12vdc system.
Do you have incandescent lights or LED? If LED you may have reversed the polarity. LEDs are polarity sensitive.
Usually the breakers on the breaker panel are 120vac and are not part of the 12vdc system.
Do you have incandescent lights or LED? If LED you may have reversed the polarity. LEDs are polarity sensitive.
