fold out tent bunk D-Seal replacement

Did anyone come up with a seal replacement that worked for the Coyote bunk end seal? I have an 08 that I need to replace and RZ no longer sells them.
Thank You

And now I go back to Amazon to find my seals and everything has changed. Previously I could pull up the kind of seal I wanted and there would be an option of a dozen width height combos, now gone. WTH.

yote' wrote:
I got quoted $2.25 per foot for 45 foot from uni grip. I have the 3 bunks. Ended up getting the job done at a local shop cause I had a few other things done as well but I don't remember what they used. I know if wasn't Uni grip. I did all the removal of old to save on labor.

I used a heat gun when removing old caulking, worked well after I got it down.

Pbois334 wrote:
Hey bass. Funny thing is when I emailed the. They responded at $1.50ft and when I called the, she said it was over $6 per ft. They honored the emailed price but weren't happy about it.. They then charged me an extra $40 on my cc as well as $26 shipping. Lol. Called and complained and they made good. Ended up costing $60 total for 20ft

Thanks for the info. I have no interest in playing that game, with that said I have found an adhesive backed D bulb seal manufactured by Trim-lok who also has an Amazon store. Looks like pricing could be $14 to $23 for 25 lineal feet depending on which seal I go with.

There is a lot of variation between the bunk door and it's frame so I'm thinking .75" wide by .625 tall might work for me.

My 2006 KZ 23CFK did not come with any type of seal at the bottom of the bunk door at the hinge, I think I'll try to come up with something for this location also.

I got quoted $2.25 per foot for 45 foot from uni grip. I have the 3 bunks. Ended up getting the job done at a local shop cause I had a few other things done as well but I don't remember what they used. I know if wasn't Uni grip. I did all the removal of old to save on labor.

Hey bass. Funny thing is when I emailed the. They responded at $1.50ft and when I called the, she said it was over $6 per ft. They honored the emailed price but weren't happy about it.. They then charged me an extra $40 on my cc as well as $26 shipping. Lol. Called and complained and they made good. Ended up costing $60 total for 20ft

Pbois334 wrote:
The old seal came up easily. I used a heat gun to soften up the glue and was able to scrape most of the glue off. Uni grip makes a great product but expensive. $6 ft. 20 ft min order

Wow an old email from uni-grip, they quoted me $1.50 a foot.

The old seal came up easily. I used a heat gun to soften up the glue and was able to scrape most of the glue off. Uni grip makes a great product but expensive. $6 ft. 20 ft min order

I am also looking for a SD-725 bulb seal. Uni-grip has what I need but they will only sell me 30' of it. I need less than half of that. I hate to have to buy more than twice what I need. I am interested in other places to purchase as well.

I have not yet dealt with my seals, but I looked on the unifrip website and I see there are a lot more options available.

Pbois334 did you have much trouble removing the old seal and glue?

Been removing and replacing vertical caulk with ProflexRV, seems to be a good product