Front brakes
I did a brake job on my 2002 2500 Dmax. The back brakes on the right rear were down to metal to metal. Put on a new rotor and pads. Now to the front. There were a lot of pad left but changed them any ...
Forum Discussion
Grit dog wrote:
What I found was during acceleration, if wheel spin was detected, the car would apply braking force to the rear brakes to control minor wheel spin prior to defaulting to traction and stability control engaging.
Excellent point and trucks do that too when the box is unloaded, ie RWD with no weight over the drive wheels. Similar to my point that proportioning valves that use ride height sensors are overusing rear brakes when they sense that the truck is unloaded.
