Front rack
For folks that are carrying a front rack on their trucks, do you get a lot of bounce on them when driving down the road not the truck just the rack? How about when you are on gravel roads that are rou...
Forum Discussion
DWeikert,
Roger, I went to Tractor Supply's website and noticed the same 16" height. Northern Tool has aluminum boxes that are a bit taller (18") that shoould accomodate the Honda generators. That Dee Zee hitch mount looks nice and I think would work with any aluminum box.
Roger, I went to Tractor Supply's website and noticed the same 16" height. Northern Tool has aluminum boxes that are a bit taller (18") that shoould accomodate the Honda generators. That Dee Zee hitch mount looks nice and I think would work with any aluminum box.
DWeikert wrote:truckcamperonmymind wrote:
kerry4951, thanks for the details. I would like to someday own a Honda eu2000i genny. Specs on Honda's website show dimensions (L x W x H) 20.1" x 11.4" x 16.7". Looks like it would fit nicely in the TS box. Have a great week.
-Chadkerry4951 wrote:
Chad
I picked up the box at Tractor Supply. Its 19" deep X 48" long.
Bought the aluminum carrier from DiscountRamps.com (Item#HCCA-2249) Make is RAGE.
From the bottom of the carrier to the top of the box is about 19".
I wanted all aluminum due to future rusting issues. Since the pic was taken I removed the 2 red lenses and replaced with amber. You can also get them at TSC or off ebay.
Careful, I've been shopping for a box and was looking at Tractor Supply, but their 48" and 36" boxes list a height of 16". Note kerry4951 said "From the bottom of the carrier to the top of the box is about 19"."
