HELP with power dist center WF 8914
I have read all the past issues with converters and such but my situation is different. I pulled my converter and tested, got 13.61VDC I went to the battery wires and showed no volts. I checked for a...
Forum Discussion
2006 SMOKEY wrote:
I have read all the past issues with converters and such but my situation is different. I pulled my converter and tested, got 13.61VDC
I went to the battery wires and showed no volts. I checked for an inline fuse but found none. I checked the fuses in the distribution panel and all were good. I followed the red wire form the converter into the distribution panel wf 8914 but do not see where the wire comes out that goes to the battery. I searched for wiring diagram but came up MT. Any assistance will be appreciated.
There is a auto resetting breaker located on the tongue, near the battery..
Should look like the pix below..
The breaker may have gone bad, one of the wires may have broken off the one of the terminals..
