Lance 1161 Wing Repair
Here we go again!!! After having replaced/repaired both wings in my previous Lance 1061, I noticed a piece of molding that "just didn't look right" in my current 2004 1161. Alright, I must confess, ...
Forum Discussion
Got a call from Lance yesterday and they came through with the filon replacement. Will be shipped out Monday with a shipping time of 5 days (hopefully!) I also was able to get the molding that will cover the filon seam from Lance as well. The Marinco electrical power inlet came in today and I gathered up all of the rest of the "stuff" that I will need to get the filon on when it arrives. I used a strong 3M brand adhesive cleaner to take off all of the old caulking and butyl tape residue and cleaned up the moldings in preparation of putting them back on.
Finally, covered up the area with a scrap piece of luan due to the forecast of RAIN for the next 5-6 days!!
Will be back then....
Finally, covered up the area with a scrap piece of luan due to the forecast of RAIN for the next 5-6 days!!
Will be back then....
