Looking for TT Bumper Carrier
Similar to this. Anyone know of a manufacturer?
Forum Discussion
hohenwald48 wrote:There is no reciever involved with this rack. The hitch pins are in the hinge parts... Two pins for each side. One acts as the hinge, the other is for the position of the rack. Insert it in one hole for the deployed position and the other for the folded up position.. Or you can remove the rack completely by pulling all of the pins.
To stop movement in the receiver I made a couple of these from junk laying around my shop but I guess you could buy them if you don't have as much shop junk as I do. :)
They work like a champ and stop all rattle and movement on a receiver.
http://www.amazon.com/gp/product/B00C5TA2QQ/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1944687702&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B0001CMUV4&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0S6EJ412XT4E6HPP5B6G
