Forum Discussion
Sir_Douglas
Jul 24, 2014Explorer
I have a 70's era 10 footer on a f250 and had similar feelings the first couple times out. You'll get used to it.
As for the stake bed tie down that's what I use. My are actually homemade. My camper is 3000 lbs loaded and ready to camp. I tighten the turn buckets as tight as I can get them by hand and put a turn or two with the a wrench, but my stake pocket tie down flexes a little on the "arm" portion. Are you concerned that the eyes are going to rip out of the camper?
Also I see no need to upgrade your tie downs like some will tell you, unless you are doing serious off roading. I have logged 1000's of miles with mine and never bent or damaged the bed as some will warn you about.
As for the stake bed tie down that's what I use. My are actually homemade. My camper is 3000 lbs loaded and ready to camp. I tighten the turn buckets as tight as I can get them by hand and put a turn or two with the a wrench, but my stake pocket tie down flexes a little on the "arm" portion. Are you concerned that the eyes are going to rip out of the camper?
Also I see no need to upgrade your tie downs like some will tell you, unless you are doing serious off roading. I have logged 1000's of miles with mine and never bent or damaged the bed as some will warn you about.
About Travel Trailer Group
44,026 PostsLatest Activity: Mar 01, 2025