Mounting & Wire Routing of In-Bed Receptacle?
Hi, I am setting up my Dodge Cummins 8' bed for a future slide-in. I would appreciate getting some advice where to mount the in-bed 7-blade receptacle. The previous owner installed a fifth wheel wiri...
Forum Discussion
I am looking for some diagrams or install info on the TRUCK CAMPER power plug between the TC and truck. There is all kinds of info online showing the 7-way connectors and other from the Trailer trailers and Fifth wheel but absolutely nothing for the slide-in truck camper...
This keeps coming up on the forums and I'd like to get up to speed on it... I see photos of the plug on the bootom of the truck camper but no pin-outs. I do understand the TC guys talk about adding an adaptor to hook this up to the 7-way connectors on the back of the truck...
What does this connection provide for with the Truck camper. I'm thinking rear and running safety lights controlled by the truck and even the license plate light- All of these are usually hid from few when the camper shell is loaded...
What else is needed... Are the pins standard...
Roy Ken
This keeps coming up on the forums and I'd like to get up to speed on it... I see photos of the plug on the bootom of the truck camper but no pin-outs. I do understand the TC guys talk about adding an adaptor to hook this up to the 7-way connectors on the back of the truck...
What does this connection provide for with the Truck camper. I'm thinking rear and running safety lights controlled by the truck and even the license plate light- All of these are usually hid from few when the camper shell is loaded...
What else is needed... Are the pins standard...
Roy Ken
