My (our) Ultimate Truck Camper Body Build
Let me start by saying that I wouldn’t have built this without my wife’s blessings. This is something I’ve wanted to build for a few years, and she was on board with it from the start of the thoughts...
Forum Discussion
AnEv942,
The tie-down “flags” were cut on the same premise on the tork-lift style. I still use my original fast-guns to tie the camper down. My originals on my 08 worked well with my fast-guns so I mimicked them. Just used 2”x1/4” wall tubing instead of 1-1/4” (I think that’s the size they use)
The spare tire will stop forward motion, it sits in a well in the bed under the rack 11” off the front wall.
The in-board rack lights are high output LED and are switched by one of the auxiliary up-fitter switches in the cab. The outboard lights are brake, running and reverse and can not be switched.
The tie-down “flags” were cut on the same premise on the tork-lift style. I still use my original fast-guns to tie the camper down. My originals on my 08 worked well with my fast-guns so I mimicked them. Just used 2”x1/4” wall tubing instead of 1-1/4” (I think that’s the size they use)
The spare tire will stop forward motion, it sits in a well in the bed under the rack 11” off the front wall.
The in-board rack lights are high output LED and are switched by one of the auxiliary up-fitter switches in the cab. The outboard lights are brake, running and reverse and can not be switched.
