Power Tongue Jack only goes up
The power tongue jack (Lippert Components model 181794) on our 2011 Keystone TT will go up (extends) but won't go down. Could a bad switch cause this? If so, should we order a new switch (about $50)...
Forum Discussion
Mine ( I don't know the model # ) has a plastic cover on the head with 4 Philips screws. Under there is a plate retained by more Philips screws. IRRC you will have to remove the ground wire to lift the plate then you can access the switch area. Don't forget to remove the fuse. All the wires will be live.
