Removing Atwood AC cover?
Anyone know how to pull this Atwood interior cover off without destroying it?
Forum Discussion
Those 4 hold-down bolts should be 'SNUG'-------5 ft/lbs torque
Gasket should be compressed 1/2 of original thickness
If comressed too much/bolts to tight then roof line can be warped or drain holes blocked by roof line
Should have roughly 1/2" gap between A/C bottom pan and roof line
If less then time for new roof gasket
Gasket should be compressed 1/2 of original thickness
If comressed too much/bolts to tight then roof line can be warped or drain holes blocked by roof line
Should have roughly 1/2" gap between A/C bottom pan and roof line
If less then time for new roof gasket
