Removing Atwood AC cover?
Anyone know how to pull this Atwood interior cover off without destroying it?
Forum Discussion
So I pulled the shroud off and found the problem.
The gasket wasn't centered very well and was hanging into the cutout a bit. I ended up adding some marine sealant to get me out of this jam. Also was able to divert the AC drip on the roof away from the gasket by jamming my finger into the styrofoam and scratching it up.
Here's the bungee strap, just hanging there unattached.
The gasket wasn't centered very well and was hanging into the cutout a bit. I ended up adding some marine sealant to get me out of this jam. Also was able to divert the AC drip on the roof away from the gasket by jamming my finger into the styrofoam and scratching it up.
Here's the bungee strap, just hanging there unattached.
