Shower head pressure
Any good options for improving the water pressure at the shower head?
Forum Discussion
I think our Oxygenics was a waste of $$. We turn the flow as low as possible to minimize water into the grey tank and the Oxygenics spits out a dribble at low flow. The Oxygenics is touted as being the cat's *ss for saving water but think it's overated. Just my internet opinion...
With an adequate city water pressure of 45-65 psi, either the OEM or Oxygenics should provide enough spray. Is the piping to the shower blocked or does the head have calcium building or is there sediment in the valves? If not, it is what it is. Old Biscuit above has an option. When we first got our TT new, it had a really bad kink in a PEX line to the shower.
With an adequate city water pressure of 45-65 psi, either the OEM or Oxygenics should provide enough spray. Is the piping to the shower blocked or does the head have calcium building or is there sediment in the valves? If not, it is what it is. Old Biscuit above has an option. When we first got our TT new, it had a really bad kink in a PEX line to the shower.
