Solar mounting hardware on Palomino M2902
I'm installing solar panels on top of my truck camper - a 2013 Palomino M2902 - but I'm unsure of the construction of the roof. Installation plans call for using a5/8" well nut, but that assumes the ...
Forum Discussion
I used 1" screws and lots of Dicor. Also laid a strip of putty tape under each leg before installing the screws. Two screws per leg and everything smothered in Dicor. My panels been on for about 4 years and still rock solid. A lot of TC roofs are 1/4" plywood under the rubber roofing material.
