solar project starting to come togeather.
Parts have started showing up for me to install solar on my camper. what I am planing is one 325 watt 120cell split panel on the roof, feeding a Renogy Rover 40 amp solar charge controler feeding t...
Forum Discussion
msiminoff wrote:
Hi Steve,
For everything that goes on my TC's roof I use either Dicor or butyl tape under the mounting surface (depends if I expect to remove it or not) and Dicor over the mounting bracket and over the screw heads. I don't personally think that it is necessary to put Dicor inside the screw holes.
Cheers
-Mark
^^^^
This.
When I upgraded the solar on my Northstar I used a strip of butyl tape under the mounting foot with the screws going through this layer of butyl to seal under the screw heads, then self leveling Dicor over the foot and screw heads.
