Stuck Tailgate 2000 Chevy Silverado 2500
Feel free to laugh at me later, but I have a serious question and problem. When I was loading the camper in March I must have bumped the metal box protecting the utility connections on my Lance agains...
Forum Discussion
If it had access panels on the inside to the release rods you might have better luck forcing it open.
Possibly jacking truck at rear corner to twist.
Never tried, mine has small cut outs where pin passes the inside wall of gate- I can see pin and pawls, might get a screwdriver to pry the pawls off pin from bed side.
If you end up cutting I'd remove as much as possible- panels release rod etc. shells cheap
Possibly jacking truck at rear corner to twist.
Never tried, mine has small cut outs where pin passes the inside wall of gate- I can see pin and pawls, might get a screwdriver to pry the pawls off pin from bed side.
If you end up cutting I'd remove as much as possible- panels release rod etc. shells cheap
