Tanneau Covers and Tool Box/Fuel Tanks

Question

I have a Perragon bed cover on my current truck which because of the way it operates would not allow me to have an auxiliary fuel tank/tool box combo. I'm thinking I will put an extra tank on the new hauler but want a bed cover that will allow me to access the tank while hooked up. The only one I have found that I think would work is the Bak Flip which folds up against the back of the cab. It doesn't appear any of the folding kind other than the Bak Flip would allow access to a tool box whether hooked up or not. It doesn't appear the kind that roll up into a box would work well with a tool box either. I want a hard cover that is lockable, by the way.

Any suggestions?

azbronco96 · Answer

Try  the Diamondback SE or HD. I have been looking at them for my truck.

jj_spectre · Answer

There are a few options at the link.  This is a Canadian distributor, but I'm sure you'll find them if you look by specific brand/model.Toolbox Tonneaus

wmoses · Answer

My hard lockable Undercover tonneau cover fits tight to the bed rails so unless the tank-toolbox is completely below the plane at the top of the bed rails, at least that type of tonneau cover will not work. The one suggested by JJSpectre might be your solution.

l would be interested to read about your final solution.

jtrac · Answer

I had looked at Bak Flip a number of times but for some reason had not paid any attention to their Roll-X roll up aluminum.  That might work.

nutinelse2do · Answer

We have the G2 Roll Bak. Our 45 gal auxillary tank fits underneath the canister, and still leaves room for our tool box in front ( cab side ) of our air hitch. Did a ton of research to figure the combo that works for us. Good luck.

Forum Discussion

Tanneau Covers and Tool Box/Fuel Tanks

About Travel Trailer Group

Related Content

Pick up tool Box extra fuel tank

Vent covers

Stove cover

Auxiliary Fuel Tank/Tool Box Thoughts/Advise

Tire covers?