Forum Discussion

ksss's avatar
ksss
Explorer
Aug 03, 2019

Test drove a Chevy 2020 HD 3500

I took a 2020 HD for a short test drive yesterday. Somethings that stood out. The infotainment is much improved from the last gen. I liked the interior, would take getting used to the relocation of the trailer brake controller but it is more logical now. Overall the interior is not blingy (this was an LTZ) but very functional more so than the previous. 10 speed is really almost seamless, felt almost like CVT. What I really wanted to see is if that dead pedal was still there. While not as noticeable I still could detect the delay. I was hoping that if there were no nannies in play that would be gone. This truck had not been PDIed and it displayed "transport mode" on the display so maybe that was part of that. The money appears to be about the same as previous gen, but there are a lot more options now, so you could easily get carried away if your not careful checking boxes. They also has a 6.6 gas HD on the lot. They said that some guys took it out and checked the mileage and were able to get 16-17 on the Interstate. If that is true, that would be a good thing if it pulls like the spec sheet says it should.
Tow Vehicles
  • Grit_dog's avatar
    Grit_dog
    Navigator
    Aug 08, 2019
    THIS is why I keep coming back!
    Pure entertainment value....good one Billy Bob!
  • wnjj's avatar
    wnjj
    Explorer II
    Aug 08, 2019
    I'm laughing at guys arguing over gears and bicycles with the irony of a guy named "Walker" laughing at them. ;)
  • walker111's avatar
    walker111
    Explorer
    Aug 08, 2019
    BillyBob Jim wrote:
    hvac wrote:
    BillyBob Jim wrote:
    hvac wrote:
    The gas version needs a the 10 speed. They care going to get killed on the Ike.


    Another 4 speeds won't make a bit of difference one way or another in the real world. Pulling a grade you're going to be in the same range 6 speed or 10. Might make a difference in a forum or waterhole BS session I suppose.

    Ike? Who cares? Maybe someone who is pulling overloaded gooseneck manure wagons from Denver to Silverthorne twice a day, 6 days a week.

    Truck threads are amusing. Man those are ugly. That's coming from someone who owns another brand, and never would have bought the ugly brand regardless.

    Now if one of the detractors happened to buy one, it would suddenly be the most beautiful thing on the planet.

    It might behoove some of you folks to set up a firewall and block those midlife crisis afflicted Boneheads at TFL truck.


    I ride a very expensive bicycle daily, approx 4k miles per year. Please dont lecture me on how additional gearing helps efficiency. 10 vs a 6 spd will make a huge difference. My current 8spd is a mechanical marvel and I won't go back.


    Good for you, I'm thrilled. BTW I ride a very cheap bicycle once every two years or so, for about 1/2 a mile.


    A riot.................. still laughing!!!!
  • hvac's avatar
    hvac
    Explorer
    Aug 07, 2019
    BillyBob Jim wrote:
    hvac wrote:
    BillyBob Jim wrote:
    hvac wrote:
    The gas version needs a the 10 speed. They care going to get killed on the Ike.


    Another 4 speeds won't make a bit of difference one way or another in the real world. Pulling a grade you're going to be in the same range 6 speed or 10. Might make a difference in a forum or waterhole BS session I suppose.

    Ike? Who cares? Maybe someone who is pulling overloaded gooseneck manure wagons from Denver to Silverthorne twice a day, 6 days a week.

    Truck threads are amusing. Man those are ugly. That's coming from someone who owns another brand, and never would have bought the ugly brand regardless.

    Now if one of the detractors happened to buy one, it would suddenly be the most beautiful thing on the planet.

    It might behoove some of you folks to set up a firewall and block those midlife crisis afflicted Boneheads at TFL truck.


    I ride a very expensive bicycle daily, approx 4k miles per year. Please dont lecture me on how additional gearing helps efficiency. 10 vs a 6 spd will make a huge difference. My current 8spd is a mechanical marvel and I won't go back.


    Good for you, I'm thrilled. BTW I ride a very cheap bicycle once every two years or so, for about 1/2 a mile.


    Speaks volumes....
  • BillyBob_Jim's avatar
    BillyBob_Jim
    Explorer
    Aug 07, 2019
    hvac wrote:
    BillyBob Jim wrote:
    hvac wrote:
    The gas version needs a the 10 speed. They care going to get killed on the Ike.


    Another 4 speeds won't make a bit of difference one way or another in the real world. Pulling a grade you're going to be in the same range 6 speed or 10. Might make a difference in a forum or waterhole BS session I suppose.

    Ike? Who cares? Maybe someone who is pulling overloaded gooseneck manure wagons from Denver to Silverthorne twice a day, 6 days a week.

    Truck threads are amusing. Man those are ugly. That's coming from someone who owns another brand, and never would have bought the ugly brand regardless.

    Now if one of the detractors happened to buy one, it would suddenly be the most beautiful thing on the planet.

    It might behoove some of you folks to set up a firewall and block those midlife crisis afflicted Boneheads at TFL truck.


    I ride a very expensive bicycle daily, approx 4k miles per year. Please dont lecture me on how additional gearing helps efficiency. 10 vs a 6 spd will make a huge difference. My current 8spd is a mechanical marvel and I won't go back.


    Good for you, I'm thrilled. BTW I ride a very cheap bicycle once every two years or so, for about 1/2 a mile.
  • hvac's avatar
    hvac
    Explorer
    Aug 07, 2019
    BillyBob Jim wrote:
    hvac wrote:
    The gas version needs a the 10 speed. They care going to get killed on the Ike.


    Another 4 speeds won't make a bit of difference one way or another in the real world. Pulling a grade you're going to be in the same range 6 speed or 10. Might make a difference in a forum or waterhole BS session I suppose.

    Ike? Who cares? Maybe someone who is pulling overloaded gooseneck manure wagons from Denver to Silverthorne twice a day, 6 days a week.

    Truck threads are amusing. Man those are ugly. That's coming from someone who owns another brand, and never would have bought the ugly brand regardless.

    Now if one of the detractors happened to buy one, it would suddenly be the most beautiful thing on the planet.

    It might behoove some of you folks to set up a firewall and block those midlife crisis afflicted Boneheads at TFL truck.


    I ride a very expensive bicycle daily, approx 4k miles per year. Please dont lecture me on how additional gearing helps efficiency. 10 vs a 6 spd will make a huge difference. My current 8spd is a mechanical marvel and I won't go back.
  • wowens79's avatar
    wowens79
    Explorer III
    Aug 07, 2019
    I was excited about the new gasser since I only tow about 8k lbs. I'm starting to look at new trucks, and there are lots of complaints about the shift points on the Ram 6.4 with the 6 speed, but everyone is loving the 8 speed that it really works well together.

    The few reviews I've seen on the Chevy from the media event in Oregon, there were a few comments that it was either lugging, or screaming on the hills. It will be interesting to see how it does. I really wish it had the 8spd or 10 spd.

    I kinda hate to leave Chevy, I've had my current one for 17 years, and 231k miles, and it has served me well.
  • ksss's avatar
    ksss
    Explorer
    Aug 06, 2019
    BillyBob Jim wrote:
    hvac wrote:
    The gas version needs a the 10 speed. They care going to get killed on the Ike.


    Another 4 speeds won't make a bit of difference one way or another in the real world. Pulling a grade you're going to be in the same range 6 speed or 10. Might make a difference in a forum or waterhole BS session I suppose.

    Ike? Who cares? Maybe someone who is pulling overloaded gooseneck manure wagons from Denver to Silverthorne twice a day, 6 days a week.

    Truck threads are amusing. Man those are ugly. That's coming from someone who owns another brand, and never would have bought the ugly brand regardless.

    Now if one of the detractors happened to buy one, it would suddenly be the most beautiful thing on the planet.

    It might behoove some of you folks to set up a firewall and block those midlife crisis afflicted Boneheads at TFL truck.


    I think it does matter. The gas engine would clearly benfit from more gears. Keeping it in the optiminum gear would certainly make it a better towing experience. The additional 4 gears would help with that. I may not run the IKE, but I do run the Teton Pass loaded and so do a countless RVers. The better it performs on the IKE, the better will perform for everyone else. Nothing wronge in my mind about having a discussion about that.


    As for the looks, I agree it gives those who werent going to buy one a new talking point, since the tow spec issue is no longer present. Even though few towed heavy enough to exceed the prior tow limits. With GMC offering a different look, it gives those who are truly interested, another option.
  • BillyBob_Jim's avatar
    BillyBob_Jim
    Explorer
    Aug 06, 2019
    Me Again wrote:
    I built a 2020 2500 on GM's site, and it produces this in the summary:

    10,650 lbs. GVWR
    When properly equipped; includes weight of vehicle, passengers, cargo and equipment

    I wonder if they are just going to drop a bomb on people when they go the register their truck and their state says that has to be licensed at a class 3 truck because it is over 10K GVWR? So why not just get the 3500 out the door?



    No one is dropping bombs. You would think when buying a truck, a person would know what they're getting themselves into regarding registration classes?

    But No, just buy it then blame the manufacturer for dropping bombs when the bill for the tag and insurance comes due lol?

About Travel Trailer Group

44,025 PostsLatest Activity: Feb 18, 2025