This leak is UNBELEIVABLE
I have been trying to solve a most difficult rain leak since last summer. I have a Wildwood DLX park model with a domed rubber roof. When it rains I get water seepage on the back side of the trailer w...
Forum Discussion
Westend, I am curious how the Eternabond tape would be used over the screw joint on the top side edge of the roof. All the pictures I have seen of it used are flat roof areas like around hatches, vents, flat seams, etc.
To apply it over a screw rail that has a gutter on the bottom I am imagining it being applied over a couple inches of the EPDM rubber roof, down over the upper part of the rail where the screws are, and down on the aluminum rail to about a point in the gutter where the water would actually collect???? Would the plastic screw cover trim piece be removed or taped over?
This seems like a very uneven surface to apply tape that is supposed to be rolled down. I have never used Eternabond so am very curious if it would be a successful long term solution on the screw joint.
Pictures anyone??
To apply it over a screw rail that has a gutter on the bottom I am imagining it being applied over a couple inches of the EPDM rubber roof, down over the upper part of the rail where the screws are, and down on the aluminum rail to about a point in the gutter where the water would actually collect???? Would the plastic screw cover trim piece be removed or taped over?
This seems like a very uneven surface to apply tape that is supposed to be rolled down. I have never used Eternabond so am very curious if it would be a successful long term solution on the screw joint.
Pictures anyone??
