Torklift F3006
Hi all, Just purchased a 2015 F350 diesel. My first diesel. Wow, what a nice truck. Truck has the 2 1/2" receiver. I called Torklift looking for a picture of how the tie downs would look mounted to...
Forum Discussion
This post was made about 2 hours after yours. Take a look here.
http://forums.woodalls.com/index.cfm/fuseaction/thread/tid/28366759.cfm
The pictures above are not a stock Ford hitch receiver, but a dual hitch by Torklift. They also sell a attachment for the camper to hook to, but that is not shown in these pictures. Also the upright section for the camera mount was installed by the very skilled owner who posted these pictures. He has a very heavy duty hitch set-up, one that puts the Ford 2.5" receiver rated at 12,000 pounds (or is it 15,000 pounds?) to shame.
Good luck!
Fred.
http://forums.woodalls.com/index.cfm/fuseaction/thread/tid/28366759.cfm
Crumm wrote:
Built me a twin tube extension with a factory style blue oval camera from camera source. Even has license plate lights. Camper bumper just sets down on it. Last picture is before it was finished but it's the only one I have with the camper on. Can see the trailer ball and everything else to the rear with the camera.
The pictures above are not a stock Ford hitch receiver, but a dual hitch by Torklift. They also sell a attachment for the camper to hook to, but that is not shown in these pictures. Also the upright section for the camera mount was installed by the very skilled owner who posted these pictures. He has a very heavy duty hitch set-up, one that puts the Ford 2.5" receiver rated at 12,000 pounds (or is it 15,000 pounds?) to shame.
Good luck!
Fred.
