Truck Seat Repair

dodge guy wrote:

IAMICHABOD wrote:
You could always get new covers,I used the Seat Shop for my vehicle,great fit just like new.

Yep. Did the bottom on the drivers seat on my Excursion. Color and fit were perfect. It looked OE after a few months of use. Worth every penny!

Spend the money and do it right. It will look terrible with tape over it. Would you put duct tape over a crack on your trailer?

Did the vinyl bucket seat in my XL the same way. Pulled the seat out, took it apart, put the new cover on the bottom seat, reinstalled the seat. Took a little over a hour and not a lot of money. Looks like new. On my Excursion I took it to a auto upholstery shop and just had the side bolster leather replaced (where you slide in and out) don't remember the cost.

A local upholstery shop did my seats and I'm very pleased with the result.

Quite a while ago I asked about truck seat repair. Well, I got a repair kit, and it appears that the kit only covers tears in the fake leather. You can not use it as a surface band-aid. Finally, I got fed up and looked at one of the eternabond products I have and it DID mention that it can be used on vinyl. Well, I tried it on a small portion of the worn truck seat, and it is holding and working splendidly. I do not care of a color match, just to fix the chaffing on the seat so it does not get worse. I will be completing the project. So, for those of you who have this problem and just want a repair not caring about color use the eternabond Foof Seal tape. Before you apply it just round the corners. I have the 4'x60" sealing tape. On the front of the package it lists the many uses.

I had both my Lariat front seats completely recovered when they were looking shabby. The new leather has held up very nicely. The now punched seating surfaces are much more comfortable.

Or go with duct tape ;)

The part of the seat that wore out is called the BOLSTER. I just had my 06 Ram leather bucket seat recovered. Total cost was $425 including new OEM leather cover (seat only) and labor. I removed and delivered the seat to the 2 man shop. My 06 dually Cummins Laramie with only 98,000 miles stickered at $51,000........a new one stickers at $84,000!
Investing $425 for a new leather seat cover is a bargain.
BY THE WAY, I asked the owner why Dodge Rams have this area wear out, where you slide in and out. He said that area is called the seat BOLSTER. He said ALL trucks (Ford/Dodge/GMC-Chevy) have this area wear out. I said if it is so common, why don't they reinforce this area.........knowing that it will wear out. He said because it is one more reason to buy a new truck!

As the old commercial goes..."You can pay me now or you can pay me later". You'll get the jest.

Bite the bullet and have it done right

https://www.youtube.com/watch?v=OHug0AIhVoQ

Grit dog wrote:

dodge guy wrote:
Would you put duct tape over a crack on your trailer?

Based on the OP's reply earlier, I don't think you want the answer to that!

If I didn't know any better I would say it sounds like something my grandfather would do to his tractor! LOL

joelc wrote:
I have a 2006 Ford Lariet with the fake leather seats. In one area the seat is wearing (about 6 x 6 area). What I want to know is if any one has had luck with any manufacture of vinyl repair or will eternabond roof tape work? The problem is on the driver side front area left of the seat, so it is not a flat area, but curved.

Weird, my leather seat are real, at least the seating surfaces in the front seats.

There are LOT's of video's on youtube on fixing leather sofa's and the like. Would more than likely work for the trucks seats if you don't want to pay someone.

Leather cut repair

I used this method to repair a leather sofa I cut moving up from the basement. Worked pretty good.

BTW my '06's seats look great. Make sure to use a leather moisturizer. Makes all the difference to keep the leather from drying out and splitting, especially on the drivers side side bolster.

dodge guy wrote:
Would you put duct tape over a crack on your trailer?

Based on the OP's reply earlier, I don't think you want the answer to that!

IAMICHABOD wrote:
You could always get new covers,I used the Seat Shop for my vehicle,great fit just like new.

Yep. Did the bottom on the drivers seat on my Excursion. Color and fit were perfect. It looked OE after a few months of use. Worth every penny!

Spend the money and do it right. It will look terrible with tape over it. Would you put duct tape over a crack on your trailer?