Uconnect 8.4 default to bluetooth?

FishOnOne wrote:

goducks10 wrote:
Okay Googled around and found this.

1. Sit in driver seat, doors closed, vehicle off.
2. Foot off the break, press start/stop button once to place vehicle in ACC mode.
3. Press the start/stop button twice to turn off vehicle.
4. Hold the Voice Recognition and Green Phone buttons on the steering wheel for 30 seconds, then let go.
5. Open the driver door for 30 seconds, or until the dash display cluster turns off - whichever comes first, then close the door.
6. Hold down the break pedal, and press the start/stop button to start the vehicle normally.

After I did step 6, my Uconnect system quickly flashed through several screens including what looked like a dial pad and the text "enter anti-theft code" (?). It still started in FM radio, but when I pressed the Media icon, it immediately went to Bluetooth (whereas in the past, I would have to hit the down arrow then select Bluetooth). I restarted the vehicle normally again, and this time it went straight to Bluetooth.

Let me know if you have any questions, or you can call Uconnect General Support here: https://www.driveuconnect.com/contact-us.html

They asked for the last 8 characters of my VIN and had me verify my name, address, and phone number (which I assume they got through RAM). Edit: The second guy asked for my address and email, then asked if I wanted to add my phone number, so I guess they weren't for verification, but to add to their records.

Sounds like a sobriety test