water heater connections
Can someone describe this type of connection and how it comes apart. thanks
Forum Discussion
AnEv942 wrote:
Similar to ours.
Ours and most use a swivel connection that threads onto water tank. Ive seen pictures of fittings without swivel that were threaded onto tank and then lines crimped on-
hopefully yours isn't one of those- a bit more involved.
I prefer those kind of Pex clamps, they're about 10,000 times easier to remove than the copper band type. A pair of end cutters and a good twist will usually break the clamp band, then its just a matter of prying it loose with some needle nose pliers and a flat head screw driver.
