Forum Discussion
mbloof
Apr 02, 2023Explorer
This is what I ended up doing. After measuring the inside width of my tail gate opening I then centered two nylon straps on my camper placed at the same width -1".
Then using one (or both) mirrors - I aim one of the trucks bed rails just to the outside of one of the straps.
It works every time as long as you can see one of the ends of your bed rails in your mirror(s).
- Mark0.
Then using one (or both) mirrors - I aim one of the trucks bed rails just to the outside of one of the straps.
It works every time as long as you can see one of the ends of your bed rails in your mirror(s).
- Mark0.
About Truck Camper Group
225 PostsLatest Activity: Jan 25, 2025