Forum Discussion
anutami
Dec 22, 2014Explorer III
AnEv942 wrote:
Looks like both...When I reinstalled our AC over removed vent picking up materials I expressed concern how close the old vent holes were to edge of gasket. Thats what was suggested I do, caulk the previous vent holes under the gasket. I gather fairly common when replaceing a vent, I ended up using eterna-bond tape to cover holes.
To give a litte background...I ordered my 2015 wolf creek 850 in May 2014 with the 9k btu coleman mach 8. To my surprise and Apache camping center mishap they installed a coleman Mach 8 13k BTU instead and it took me a camping trip to find my Honda eu2000 would not run the f'ing thing!! After several months of finger pointing Apache camping center finally admitted fault and shipped me the correct 9k btu unit (it took 2 shipments as the first unit was LOST in the f'ing mail). I finally recieved the correct unit a couple weeks go, sold the 13k btu on Craigslist to find Apache camping center installed it with Dicor and a PITA to remove. I called Apache camping center and they confirmed THEY INSTALL A/C with Dicor! Since I was replacing and there was holes in my rubber roof from the original standard vent from northwood and Dicor debris that was permanent from Apache I decided to play it safe and add Dicor of my own + the rubber seal. Hopefully no leaks.
About Truck Camper Group
221 PostsLatest Activity: Jan 17, 2025