All ActivityMost RecentMost LikesSolutionsRe: Best way to clean/shine up a 5erWell don't know about anybody else, but I use simple green & majic eraser for the black streaks (sometimes I use bartender's friend if too bad). After that I use Nufinish polish and stay on top of keeping a finish on it with Protect-All. I like Protect-All for nearly everything from glass to tires and anything in between.Re: 5th Wheel Pin Weight on 2500HD Chevy HELP!!!dpark, my pin weight is 1550#, and no I am not over my weight#,I try not to overload the fiver. I keep all my loaded weight distributed as best I can.Re: 5th Wheel Pin Weight on 2500HD Chevy HELP!!!The question you have to ask yourself, do I /will I possibly purchase a larger/heavier fiver in the future ? If there is a possibility then I would look into a 3500HD. As you will see in my sig I have a 2500HD pulling a Cougar 318sab which is heavier than your 315. I have a fiver rating of 15400# with a GCWR of 22000# Hope this may help.Re: Cougar High Country TiresHad ST225/75R15 LR/D China bombs on my '09 Cougar, changed out to Maxxis Radials only upgraded to LR/E. I've since changed again to Maxxis ST235/80R16 radials with 100 psi new wheels (not aluminum) best thing I ever did !Re: Upgrading Tires from 15" to 16"- 2006 Cougar 285 EFSIf its any consolation, I changed my ST225/75R15 LR/D tires to larger Maxxis ST 235/80R16 LR/E radials...couldn't be happier. I used the specs of newer Cougar fifth wheels for reference.Re: Adding a water filter can I use Pex Fittings on this hoseI did the same thing,however I went to HD and bought "Sharkbite" connections, so easy & simple and NO leaks.replacement baggage doorI would like to replace one of my baggage door assemblies,I have the size & model number (from Keystone sticker). Has anyone ever called Keystone and attempted to order one from the factory ? All info well appreciated..ThanksRe: Clunking noise while towingHad a similar noise/clunk problem with my Reese 15k (no slider) I had play where the "pins" go into the rails. Someone on here posted making shims to correct the problem.well I used Gorilla h/d duct tape and cut out where pins go....problem gone.all I do is replace tape when needed.
GroupsFifth Wheel Group Interested in fifth wheels? You've come to the right spot.Jan 13, 202519,006 Posts