I found a slight leak in the front seal of the differential while I was checking for issues. I tried to get the fill plug out to top it off, and it's rusted shut. In fact, the 1/2" ratchet wouldn't even fit. No matter what I did I couldn't make it wo...
I've been considering getting one for my truck, but when I think about RVing, it makes even more sense.I know to get one with a capacitor, but it's really hard to tell what is quality and what is not.Are there any recommendations here for dash cams?
My generator quit a few weeks ago while I was on a trip. It ran all day but wouldn't start the next day. It looked like the carb was leaking a little fuel, maybe a crack or a bad seal or something. It needed maintenance either way.This is an Onan Mic...
I was prepping for a trip and inspection next week. Three of the top lights on the rear of my 31C Minnie were out. I fiddled with them and saw that none of the bulbs were out. It was somewhere in the wiring and then one of the wires came out of the h...
I'm posting a couple of pics of the corners of my overhead bed.This is a 2000 Winnebago Minnie 31C.During a recent 5500 mile trip, I saw a lot of flex happening above the cab. When I got back, I noticed that the corner seal has come loose. I had seal...
You'll probably need to post some pictures, but the place I usually start is dismantling to see how it was originally fastened. Often, the original way is just fine, but something has broken. If that's the case you can buy new parts or make something...
I've never driven an "A"... for me it was always what can I get for the money. I ended up with a "C" and I don't have a problem with it. It drives nicely, my wife can drive it like a car. It's no big deal and most of all it fits our life. I think thi...
The bolts were actually solid underneath, which I thought they might be, but yeah, it would be a nightmare. I got it all snugged up and torqued. I could not find specific torque specs so I went with 25lb, which to me feels maybe slightly more than th...
I got the cover off today. The bolts came out surprisingly easy.I'm including a link to the imgur album instead of linking 10 pictures.https://imgur.com/a/NLhbX9SI ordered some new bolts and will pick them up tomorrow and put it back together.
I found this on order from advance auto for $37 + shipping. It appears to be the same size so it's a dana 80.https://imgur.com/VnoIjNHSo I soaked the bolts and will try to crack this puppy tomorrow. The bolts are rusty as heck, so I may replace them....