Mmtbpz
Explorer
Joined 8 years ago
User Profile
User Widgets
All Activity
Re: 96 rexhall dometic fridge shuts off
Mmtbpz wrote: One of the first things i did was clean the burner and orifice..i have a nice blue flame across the entire length of the burner..theoretically if i use the same bbq lighter i used to physically test the coupler..i should be able to simulate the burner..if it stays lit with a bbq lighter heating it ..one would then assume the coupler or connection or adjustment isnt the culprit...correct ? Peter363Views0likes0CommentsRe: 96 rexhall dometic fridge shuts off
One of the first things i did was clean the burner and orifice..i have a nice blue flame across the entire length of the burner..theoretically if i use the same bbq lighter i used to physically test the coupler..i should be able to simulate the burner..if it stays lit with a bbq lighter heating it ..one would then assume the coupler or connection or adjustment is the culprit...correct ? Peter362Views0likes0CommentsRe: 96 rexhall dometic fridge shuts off
I was thinking connectors at one point...double checked my connections were in the correct position and then checked tightness and cleanliness.the connector is brand new as I replaced the coupler last fall to no avail..and now this year the board is brand new..i needed needle nose to pull the connectors off ..very tight fit..seem to recall last year with just replacing the coupler the fridge would light and within seconds ..shut off..this year with the addition of new board it stays lit for approx. 1 min..but shuts off everytime..no deviation..something is telling it to shut down..Has to be coupler no ? but its new and seems to test fine..1 thing i noticed was my meter read the millivolts in negative ..not sure its working right as it only momentarily read the dc voltage at the board..went from 12 volts to .439 volts...battery is a bit low.. Thx in adv Peter364Views0likes0Comments96 rexhall dometic fridge shuts off
Dometic fridge lights and stays lit for about 1 minute.. gas valve clicks and fridge shuts down...cleaned the burner tube and orifice ...replaced thermocouple last year..didnt help..just replace board and although the flame seems to stay lit a tad longer it still shuts off after a minute ..bought the dinosaur p711 board...tested thermocouple and within 30 secs it produce 35 millivolts.. Any help ? Obviously missing something ..but dont know what at this point.. Any help is appreciated Peter1.2KViews0likes8CommentsMagne tek xonverter replacement
New to rving and this forum..wondering if someone can shed some light on my magnetek 6300 converter replacement..im looking to replace the converter portion with a deck mount progressive dynamic 9260 type charger xonverter..on the 12 volt side there are 2 connections. 1 white and 1 red..my magnetec has 3 ..an additional blue..read somewhere that this blue wire needs to be jumpered at the dc fuse panel to the red lead so as to supply filtered power to the entire fuse panel...can someone verify this is the proper way to install this type of new converter or send me in the correct direction if im totally off base in trying to install this converter this way. Thx in adv Peter1.2KViews0likes8Comments
Groups
