routemaster
Explorer
Joined 20 years ago
User Profile
User Widgets
All Activity
Re: Bedroom slide bind
dougrainer wrote: I have worked on and FIXED Dozens of Accu Slide systems. And YES, I have no idea what you are talking about:B Download this link and watch the various video's and see if that does not help you. Doug https://balrvproducts.com/products/oem/accuslide/index.shtml Hey Doug. I bought three lengths of aluminum for the roller plates and I was going to shim the center one up by a 1/8" then on the other one by a 1/4"so as to create a run on the sill this was just to take the corners away from the studs, so as not to shear the wipes. The rough out does appear to be out of square by at least 7/16"/ 1/2".Jacking up the low end does take the floor away from the internal wipe don't like that idea. Your thoughts please being you worked on these Accu-slides. Den.513Views0likes0CommentsRe: Bedroom slide bind
So, as I don't destroy the new set of wipes, I have bought three-roller plates to fix under the floor for rollers to run on, then shim them up to create the run on the sill to take out the bind until I can get the frame straightened and remove the shims. Thoughts.513Views0likes0Comments- 514Views0likes0Comments
Bedroom slide bind
I have an issue with our bed slide with the Bal-Accu system installed. Problem is that the top left and bottom right corners are in a bind and have destroyed the wipes. On inspection, I have found that the sill is running down towards the front the king studs are plumb. So, I am thinking to take the box out of the bind I would have to shim up the rollers by at least 1/4"+ on the first one then a 1/8" on the second one, which I don't think is likely to do no space to get at the screws or I have some three-roller plates which I could shim too different thicknesses to create the run on the sill. One other thing that came to mind was to buy a J-36 roller and fix the outside wall. Thoughts, please. Make sense?3.8KViews0likes11Comments
Groups
Fifth Wheel Group
Interested in fifth wheels? You've come to the right spot.Feb 16, 202519,006 Posts
