TXbillervin
Explorer
Joined 10 years ago
User Profile
User Widgets
All Activity
Girard 3rd Gen Tankless water heater
At the risk of sending things into a descending spiral, has anyone heard anything about the latest generation of Girard tankless systems the GSWH-2. I read all the discussions here and it seems the 1st gen was less than ideal and the 2nd worked out most of the kinks, so I'm interested in what the 3rd gen has in store for us I have a 10 gallon Suburban that gave up on our last trip in November and I'm looking to replace it. Bill1.8KViews0likes4CommentsRe: Kwikee Steps
ksg500... I actually replaced the whole step early last year because of damage before I bought the coach so I've already jump through that hoop :-) Thanks everyone.... I'm going to replace the control unit. $140 + shipping at Camping world. aaaaaaaaaaarrh!! Checking with Kwikee to see if I can replace it with a newer less expensive version of the unit on Amazon.394Views0likes0CommentsRe: Kwikee Steps
Kevin... Correct! There was a little bending and it was straightened. As I said there is no binding of the stair frame mechanism. When I have some time I was going to check current levels out of the control box but I haven't been able to do that yet. I'm afraid the control box was damaged, the motor only extends the stair and will not retract it. If I power the motor in reverse without the control box it will retract. I'll look at the tech info... thanks Oldme394Views0likes0CommentsKwikee Steps
My story is.... Left my coach parked next to my house for a couple of days, air suspension leaked out faster on one side so the steps were closer to the ground than normal. When I opened the door the step extended part way and stopped at the ground. I started it up, and suspension lifted but the steps didn't move, and haven't worked since. 1. I removed the motor and tested it. It works both ways with direct power both on and off the gearbox. 2. the step frame works with the motor off the gearbox, without any binding 3. I have power to the system with key on and off and the magnetic switch is working correctly, when I open the door the steplight comes on, closed it goes off. 4. when I plug the motor into the control unit off the gearbox it runs for about five seconds and stops. If it is bolted to the gearbox it extends the step to full extension and when you remove the motor from the gearbox it is binding. Questions: 5. The step is a kwikee seres 39 single step unit and the control box part # is 1800709 Rev OE2.7KViews0likes10Comments
Groups
