So, a week ago, the water heater started acting up. Sometimes it would work as it should, sometimes it would light and burn until the water was hot. When it did, it might not re-light when the water was running, and you'd end with a colder than wante...
Sorry, this isn't about swat teams and suicidal ladders, well, I guess it might be suicide to climb mine. The bolts have rusted inside the tube that attaches and holds the ladder off my TC. I've looked all over, and, I don't really know what to call ...
Well, it's getting deeper. I came home this evening and decided to go ahead and check and clean the terminals and grounds. Everything was good and tight, although I did clean up the grounds some. Checked voltage and have 12.8 volts. With camper plugg...
Thanks Old Biscuit. I'm thinking along your lines. I'm tempted to start replacing the spade connectors. I'm thinking one of them might not be getting good contact, and when I had them off and on the other day, it "fixed" itself temporarily. I already...
Gjac wrote:The epoxied SS T nuts would would not hold very good even though they would not rust. As soon as you apply tension to the bold the epoxy bond will fail. If you cant find the long SS bolts or connectors another fix that I first thought of i...
Thanks for the link westend. I watched a video there that describes exactly what Gjak explained. I was thinking along these lines, except I was thinking I'd epoxy ss "T" nuts inside the flange that screws to the camper, and, if I could find them, lon...
wgriswold wrote:The "capacitor" may have been a thermal fuse. My hood fan quit working and I discovered that the thermal fuse had blown. It looked like a capacitor.The fan in my 2000 Bigfoot never worked from day one. The original owner never used ...
