All ActivityMost RecentMost LikesSolutionsRe: LED upgrade on C921 lightsI got these a few weeks back.921 led They have 5 led's they are not as bright as the normal bulbs. If I were to get them again I would get these 921 LED They have an extra 4 Led's.Re: Full tank of Propane=How many days of usage?last weekend we did 3 nights of in the low 30's. 20lbs MT and moved on to the second one! Like prev posted keep an eye on your battery that's where you will have the problem!Re: LED replacements for 921 bulbs 000 wrote: http://www.aliexpress.com/snapshot/226711228.htmlI have theses on the way to me now. Ill keep you posted. If there no good i wasted a big $12 lol well after a long wait i got the bulbs! like i expected there not as bright but they will be good enough for me! now if anyone is looking at buy any LED i would get these. http://www.aliexpress.com/item/Hot-sell-T10-5050-9SMD-Nature-White-color-led-instrument-lights-Signal-lighting-reading-lamp-dome/580950381.html they have 9 LED the ones I have only 5.Re: hot water heaterJust an update. I installed the new thermostat and tested. The heater fired for about 40min then cut out! I drained out some water and it cut right back in! Thanks for the help,Re: Atwood water heater question.Just an update. I installed the new thermostat and tested. The heater fired for about 40min then cut out! I drained out some water and it cut right back in! Thanks for the help,Re: Atwood water heater question.its a 6 gallon.Re: Atwood water heater question.stupid question but.. check it right out of the tap best place? 140-145 degreesRe: Atwood water heater question.I got the new kit this morning. I will install it this afternoon. If i find it seems like the heater is still not cutting out. What would be the max you would let it run for? Im going to monitor the water temperature with a thermometer.Re: hot water heaterI got the new kit this morning. I will install it this afternoon. If i find it seems like the heater is still not cutting out. What would be the max you would let it run for? Im going to monitor the water temperature with a thermometer.Re: Atwood water heater question. phays wrote: Check the water temperature when you think the water is hot enough and the unit should shut down. The thermostat will control the temperature at around 140F or so. If the thermostat fails, the ECO will shut the unit down at about 180F. Should that happen, you will have to turn the unit off and then back on to get it to light again. The thermostat and ECO are sold as a pair and it takes only about 5 minutes to replace them. My t-stat failed and I had extremely hot water. I checked the temperature and it was about 170F. Way to hot for safety. Of course, this may not be your problem but checking the temp will tell you if the heater has reached the temperature for the t-stat to shut the burner down. Go here for a service manual. Bryant RV . The water heater manual is near the bottom of the page I'm going to get a thermostat and ECO kit tomorrow. Hope the rv place hs it in stock! I'll keep you posted
GroupsMotorhome Group Join in here to discuss all things motorhomes.Jan 14, 202538,705 PostsTravel Trailer Group Prefer to camp in a travel trailer? You're not alone.Jan 20, 202544,029 Posts