The window's seals between the two glass pieces have failed. I have found replacements from the original supplier. I have two questions, how do you remove the valence from over the window, and what would you recommend that I use to seal them when...
I am planning on driving the Liard highway August/September this year. Going up through Alberta, past Slave Lake and along the Liard river coming out near Ft Nelson in BC. Interested to know road conditions, fuel stops and interesting stops. Drivin...
I changed from the 17 inch to the 20 inch. My 08 Ram comes from the factory with either tire so I thought that all suspension and braking issues would be a non-issue.I have found that for the same rpm on the highway I am running 8 miles per hour fast...
I have the 2004 NL and a 2008 dodge crew cab long box, camper fit's just fine. It's tight at the rear but has about 3/8 inch clear each side and I use 2 inch high density foam under it to clear the cab roof.
Looks like it's to tight at the bent edge...could you use an angle grinder to remove some of the inside of the tailgate to relieve the pressure? Good luck!
